F02 TDS English
• One single version to cover the whole range of power supply (24 to 240V DC or AC single phase input
voltages at 50 and 60 Hz).
• One single version to cover the whole range of operating times (8 to 400 seconds), with the
possibility of different stroking times in the opening and the closing manoeuvres.
• One single version with interchangeable base plate for connection to various types of valves.
• Separate terminal block for easy and safe installation.
• As an option, Bluetooth technology allows your PDA or PC to have direct access to the F02
TM
for non-intrusive operation, configuration and diagnostics.
A look inside F02 basic design features:
Mechanical connection to the valve: interchangeable base plate to suit various options
foreseen on the Ordering Table (page 18). Shaft drive via insert bush to provide EN ISO 5211
dimensions and all the main standard dimensions of valve shafts. The drive insert meets all the
different flange standards.
Electric motor: one single innovative universal electric motor for each model, with suitable POWER
SUPPLY MODULE™ to accept 24 to 240V DC or AC single phase input voltages at 50 and 60 Hz.
Three-phase motors with power supply from 208 to 575 VAC (at 50 or 60 Hz) are available as option.
Within the above power range, connect the F02 without taking care of the voltage available in your
plant: the actuator will recognise it and adapt consequently.
The motor duty cycle at 40°C is S3-100% for all models.
Electric motor thermostat: an overtemperature device to control the motor temperature is included
as standard in the electric motor frame.
Actuator service: the same actuator covers the operation of ON-OFF and MODULATING valves
(with optional OM1 card).
Compact and light design: the construction is very compact and balanced for easy installation and
operation onto small valves without affecting stresses in the pipework and loads to the valve shafts.
Reduced power consumption: thanks to a very low motor power consumption, it is possible to
reduce the costs for electric power and also for the connection cables, since one single cable size is
suitable for all actuator models.
% &/((/
!@#$ flow control
4
ICON2000 technology: the electronic-mechanical design is based on the experience of ICON2000
advanced solutions with innovative features to provide maximum flexibility in terms of voltage supply,
operation speeds and torque options.
Actuator control, setting and diagnostics: each single function and parameter in the actuator
control, setting and diagnostics is available in remote or locally.
Local manual override: the basic feature includes a constantly engaged manual override,
not rotating during motor operation, with manual input through the same handwheel.
Torque and sizing: the F02 range comprises six different torque sizes, with inherent options
for various voltages, motor supply and speeds, foreseen to cover up to 2.000 Nm with operation
time varying from 8 to 400 seconds.
The nominal output torque value is constant along the entire stroke.
Torque control: torque control is active in both directions with independent setting from 40% to
100% of nominal value.
Torque setting by user-friendly rotary switches located inside the control enclosure.
Actuator body and construction: the F02 body is in anodized die-cast aluminium, with epicyclical
internal gearing in sintered alloy steel, lubricated with grease. The output drives are in cast iron.
% &/((/
!@#$ flow control
5
 |
 |
